阿南電機株式会社
このサイトは次の URL に移転しました。http://www.anandenki.jp/disaster/ecad1/index.php
| 特長 | 仕様 | 使用事例 |

電気・計装設備の健全性、ケーブルの
健全性劣化傾向診断装置 ECAD system

原子力プラント・航空宇宙・軍事分野 電気・計装設備の健全性、ケーブルの健全性劣化傾向診断装置 ECAD system

※当製品についてのお問い合わせは、東京支店 藤原(03-3514-2701)まで

  • 詳細説明(英語原文)
  • 海外納入実績


◆計測モード

(1) Dielectric Loss-Dissipation Factor/Power Factor Test (tan δ test)
                          誘電損失-誘電正接/力率テスト(tanδテスト)
(2) Insulation resistance/Polarization Index/Dielectric Absorption Ratio Test
                          絶縁抵抗/ 成極指数/誘電吸収比テスト
(3) Time Domain Reflectometry(TDR) Test        TDR 法
(4) Waveform Acquisition(glitch-capture) fro intermittent events グリッチキャプチャー
(5) Standard bulk electrical property measurements 一般的な計測
  (a) Capacitance           キャパシタンス
  (b) Inductance            インダクタンス
  (c) Impedance            インピーダンス
  (d) Phase angle            位相角
  (e) Reactance             リアクタンス
  (f) AC & DC resistance AC DC  抵抗
  (g) AC & DC voltage AC DC    電圧
  (h) Insulation resistance      絶縁抵抗 ---- 電圧各種

◆製品仕様

Host PC Controller Characteristics Industrial enclosure; MIL 810F/461E qualified
14.1-inch display - SXGA+ 1400x1050 LCD
84-Key Keyboard/Integrated Trackball
USB, RS-232, GPIB, Ethernet ports
PCI-3102 Time Domain
Reflectometer (TDR) Card
Step pulse, 50 W characteristic impedance
10-bit vertical resolution
Two (2) data record size options:
§High resolution (16k points)
§Low resolution mode (1k points); compatible
    with older ECAD data
ISA form-factor
PCI-3432 DMM/IR Card Performs AC and DC voltage measurements
Performs DC resistance measurements
Performs insulation resistance tests
§ Selectable test voltages in 1 volt steps
§ Range: 50 VDC to 500 VDC
PCI form-factor
PCI-3232 LCZ Card Measures impedance and phase angle directly
Nine pre-set test frequencies: 100 Hz to 40 kHz
Extended frequency range to 260 kHz
Floated or grounded measurements
PCI form-factor
PCI-3332 Coaxial Instrument
Switch Card
Provides connection between
instrument cards and test lead
PCI form-factor
使用条件 Operating temperature: -25.6℃〜+45℃
Non-operating temperature: -25℃〜+70℃
Operating shock: 15 G, 8 msec
Non-operating shock: 40G, 8 msec
サイズ L 483 x W 330 x H 203
重量 15kg

◆利用例

熱電対の回路の解析 ------ ECAD System 1台で複数の計測方法による解析

  • 導体の抵抗値の測定 --- 導体の健全性
  • 絶縁抵抗 ------------- 絶縁材・接続部絶縁の健全性
  • TDR法 -------------- 不具合地点(例:断線箇所)の特定
  • キャパシタンス --------- 水分の有無による影響の判定 

◆ユーザー事例

ユーザー名 保有台数 運用年数
Elxelon, US 2台 5年
Entergy, US 3台 2年
Texas Utility, Us 1台 20年
Southern California Edison, US 2台 25年
First Energy 3台 20年
Dominion Energy, US 2台  
FP & L, US 3台  
Bruse Power, Canada    
British Energy, UK    
KEPCO Kori, Korea    
Nordostschweizerische, Switzerland    
Vattenfall Ringhals, Sweden    
Santa Maria de Gerona, Spain    
NASA 21台